Epson PLQ-30 - Magnetic stripe reader;writer (horizontally installed only)

Roll paper
A The minimum top margin is 1.0 mm (0.04 inch).
B The minimum left and right margins are 3 mm (0.12 inch).
Magnetic stripe reader/writer (horizontally installed only)
The horizontal magnetic stripe reader/writer is used to read and write data on the magnetic stripe on
bank passbooks. See the following specifications of this device for details.
Recording code BCD Binary Coded decimal, 4 data bits,
1 VRC parity control bit
Recordable characters column 3 of the ASCII table
Recordable formats IBM3604, DIN/ISO, ISO7811, IBM4746, ANSI, HT-2751-CIZ,
ISO8484
Recorded track width 9.7 mm
Read track width 1.1 mm
Speed of medium 340 mm/second
PLQ-30/PLQ-30M User’s Guide
Product Information 119