5. Bring the leading edge of the paper up over the front of the printer and insert it into the front slot
until it meets resistance. The printer loads the roll paper automatically.
You are now ready to print. When you finish printing, advance the paper by issuing the paper feed
command (in PR2 mode), pressing the F1/Eject button (in WNI4915 or EPSON Mode), or
pressing the Offline button and then the F1/Eject button (in IBM4722 mode). Then cut the roll
paper where it comes out of the printer.
PLQ-30/PLQ-30M User’s Guide
Options and Consumables 95
To Next Page
Loading...
