Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
Cannot Save the Data to a Memory Card
❏ Use a memory card which is supported by the printer.
❏ Check that the memory card is not write protected.
❏ Check that the memory card has enough available memory. If the available memory is low, data cannot be
saved.
Related Information
& “Supported Memory Card Specications” on page 128
Application Is Blocked by a Firewall (for Windows Only)
Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
"?" Is Displayed on the Photo Selection Screen
"?" is displayed on the LCD screen when the image
le
is not supported by the product.
Related Information
& “Supported Data Specications” on page 130
User's Guide
Solving Problems
124
To Next Page
Loading...
