3. Click EPSON Status Monitor.
Ink Cartridge Code
e following is the code for genuine Epson ink cartridge.
372
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink. e use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
Note:
Ink cartridge codes may vary by location. For the correct codes in your area, contact Epson support.
Related Information
& “Technical Support Web Site” on page 136
Ink Cartridge Handling Precautions
Read the following instructions before replacing the ink cartridge.
Handling precautions
❏ Store ink cartridges at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink cartridge before the date printed on the package.
❏ For best results, use up ink cartridge within six months of opening the package.
❏ For best results, store ink cartridge packages with their bottom down.
❏ Aer bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at
least three hours before using it.
❏ Do not open the ink cartridge package until you are ready to install it in the printer.
e
cartridge is vacuum
packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal
printing may not be possible.
❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or
you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.
User's Guide
Replacing Ink Cartridges and Other Consumables
71
To Next Page
Loading...
Need help?
General
