Epson PM-520 series - Page 34

For envelopes, load in the direction indicated by the arrow.
5.
Slide the edge guide to the edge of the paper, and then close the feeder guard.
6. Check the paper size and paper type settings displayed on the control panel. To use the settings, select
Conrm
using the
u or d button, press the OK button, and then go to step 8. To change the settings, select
Change using the
u or d button, press the OK button, and then go to the next step.
Note:
❏ When the Paper Setting Alert feature in the Printer Setup menu is enabled, a message is displayed if the registered
paper size and paper type settings dier from the print settings.
❏ e paper setting screen is not displayed if you have disabled Paper Conguration in the following menu. Go to step
8. In this situation, you cannot print from an iPhone or iPad using AirPrint.
Setup > Printer Setup > Paper Source Setting > Paper Conguration
User's Guide
Loading Paper
34