Epson PP 803 - Page 218

Appendix D IBM ProPrinter Quick Refernce
D-4
Table 3 (Cont.): Vertical Form Handling
Escape Sequence Mnemonic Function
ESC ] Reverse Line Feed
ESC [ > P1 ; P2 ; P3 ; P4 s SPSIF Select Paper Source and Insert
Native Command Form (>), Print Gap, Paper Exit, Cut Mode
Note:
Any parameter is optional and may be skipt .
ESC [ P1 s SPS Paper Source:
Native Command P1 = 0 : Manual Feed )
2
P1 = 1 : ASF, Bin 1 )
1
P1 = 2 : ASF, Bin 2 )
1
P1 = 3 : ASF, Bin 3 )
1
P1 = 6 : upper Tractor
P1 = 7 : Tractor Feed (lower Tractor)
P1 = 8 : AFS, Bins 1 or 2 )
1
P1 = 9 : ASF, Bins 2 or 3 )
1
P1 = 10 : ASF, Bins 1 or 2 or 3 )
1
P1 = 15 : upper and lower Tractor
) only for printer
PP 806
; ) not for
PP 809
12
ESC [ ; P2 s AGC/PCC Procedure:
Native Command P2 = 0 : Automatic Gap Control
P2 = 1 : Print Gap for 1-ply copy
P2 = 2 : Print Gap for 2-ply copies
P2 = 3 : Print Gap for 3-ply copies
P2 = 4 : Print Gap for 4-ply copies )
3
P2 = 5 : Print Gap for 5-ply copies
P2 = 6 : Print Gap for 6-ply copies
P2 = 7 : Print Gap for 7-ply copies
P2 = 8 : Print Gap for 8-ply copies )
4
P2 = 9 : Print Gap for 9-ply copies )
4
)
PP 809
max 4 copies; ) only for printer
PP 803
24