220
Setting Options Description
SDI Settings Link Type
Manual Settings
Select the signal settings for the
SDI port
Link Type: select Single (Auto)
to let the projector read the
payload ID for the input signal
and automatically display the
image, or select Single (Manual)
when you know the type of input
signal and want to select the
same signal in the Manual
Settings options
Manual Settings: set various
SDI settings manually or reset
them to their default values
Color Calibration Start Auto Adjustment
Undo
Redo
Color Uniformity
Automatically detects color
deterioration and adjusts the
color tone
Start Auto Adjustment:
automatically adjusts the color
tone for the whole image
Undo and Redo: undoes or
redoes the auto adjustment
Color Uniformity: adjusts the
color tone balance for the whole
image
To Next Page
Loading...
