If you print using the standard quality setting, light banding may appear in the printout. When you transfer this to
cloth, the banding may not be visible. Check the image
aer
transfer. If banding appears even
aer
transferring,
print using a higher quality setting.
Banding or Unexpected Colors Appear
e print head nozzles may be clogged. Perform a nozzle check to check if the print head nozzles are clogged.
Clean the print head if any of the print head nozzles are clogged.
Related Information
& “Checking and Cleaning the Print Head” on page 78
Colored Banding Appears at Intervals of Approximately 2 mm (0.8
in.)
Align the print head using the Horizontal Alignment feature.
Related Information
& “Aligning the Print Head” on page 81
User's Guide
Solving Problems
110
To Next Page
Loading...
