❏ When the problem cannot be cleared aer cleaning the paper path, the part inside the printer that is shown in
the illustration is smeared. Turn
o
the printer, and then wipe
o
the ink using a cotton swab.
Do not touch the white at cable, translucent lm, and ink tubes inside the printer. Doing so may cause a
malfunction.
❏ Place the paper on a at surface to check if it is curled. If it is, atten it.
Related Information
& “Loading Paper in the Paper Cassette” on page 41
& “Cleaning the Paper Path for Ink Smears” on page 82
The Position, Size, or Margins of the Printout Are Incorrect
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
❏ Select the appropriate paper size setting.
❏ Adjust the margin setting in the application so that it falls within the printable area.
User's Guide
Solving Problems
114
To Next Page
Loading...
Need help?
General