Epson SC-F100 Series User Manual

❏ If you have entered the SSID manually, check if it is correct. Check the SSID from the Network Status part on
the network connection report.
❏ If you are using push button setup to establish a network connection, make sure your access point supports
WPS. You cannot use push button setup if your access point does not support WPS.
❏ Makes sure your SSID uses only ASCII characters (alphanumeric characters and symbols).
e
printer cannot
display an SSID that contains non-ASCII characters.
❏ Makes sure you know your SSID and password before connecting to the access point. If you are using an access
point with its default settings, the SSID and password are located on a label on the access point. If you do not
know your SSID and password, contact the person who set up the access point, or see the documentation
provided with the access point.
❏ If you are connecting to an SSID generated from a tethering smart device, check for the SSID and password in
the documentation provided with the smart device.
❏ If your Wi-Fi connection suddenly disconnects, check for the conditions below. If any of these conditions are
applicable, reset your network settings by downloading and running the soware from the following website.
http://epson.sn > Setup
North America and Latin America
To view and download soware options, visit:
www.epson.com/support/scf170 (U.S.)
www.epson.ca/support/scf170 (Canada)
www.latin.epson.com/support/scf170 (Latin America)
❏ Another smart device was added to the network using push button setup.
❏ e Wi-Fi network was set up using any method other than push button setup.
Related Information
&
“Connecting to a Computer” on page 20
&
“Making Wi-Fi Settings from the Printer” on page 21
E-5
Message:
Security mode (e.g. WEP, WPA) does not match the current setting of the printer.
Conrm
security mode. Contact
your network administrator for assistance.
Solutions:
Make sure the access point's security type is set to one of the following. If it is not, change the security type on the
access point, and then reset the printer's network settings.
❏ WEP-64 bit (40 bit)
❏ WEP-128 bit (104 bit)
❏ WPA PSK (TKIP/AES)
*
❏ WPA2 PSK (TKIP/AES)
*
❏ WPA (TKIP/AES)
❏ WPA2 (TKIP/AES)
User's Guide
Network Settings
31

Epson SC-F100 Series Specifications

General

Operating Systems Supported	Windows, macOS
Ink Colors	Cyan, Magenta, Yellow, Black
Weight	4.6 kg
Maximum Print Width	210 mm
Connectivity	USB, Ethernet
Paper Size	A4, A5, A6, Letter
Ink Bottles	4 bottles (CMYK)
Dimensions	375 x 347 x 187 mm
Operating Temperature Range	10 - 35 °C
Operating Humidity Range	20% to 80%
Print Resolution	600 x 1200 dpi