c
Important:
Wipe o the smear gently. If you press the cotton swab too hard to the lm, the springs of the lm may be
dislocated and the printer may be damaged.
6. Use a new dry cotton swab to wipe the lm.
c
Important:
Do not leave any bers on the lm.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
7. Repeat steps 5 and 6 until the lm is not smeared.
8. Visually check that the lm is not smeared.
9. Close the printer cover.
Note:
e printer cover is designed to close slowly and resist a little as a precaution against catching ngers. Continue to close
even if you feel some resistance.
User's Guide
Maintaining the Printer
87
To Next Page
Loading...
