4.
Follow the on-screen instructions to print an alignment pattern and select the number for the optimum
pattern.
Find and select the number for the most solid pattern in each group.
Cleaning the Paper Path for Ink Smears
When the printouts are smeared or scued, clean the paper path inside. Cleaning sheets cannot be used for this
purpose.
c
Important:
Do not use tissue paper to clean the inside of the printer.
e
print head nozzles may be clogged with lint.
1.
Load plain paper of the following size in the rear paper feeder.
SC-P900 Series: A2
SC-P700 Series: A3 or A3+
“Loading Paper in the Rear Paper Feeder” on page 29
2.
Select
on the printer's control panel.
3.
Select Maintenance > Paper Guide Cleaning.
4.
Follow the on-screen instructions to clean the paper path.
Note:
Repeat this procedure until the paper is not smeared with ink.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
1.
Select
on the printer's control panel.
2.
Select General Settings.
3.
Select Basic Settings.
Maintaining the Printer
>
Saving Power
106
To Next Page
Loading...
Need help?
General
