Epson SC-P900 Series User Manual

The paper path is smeared.
Solutions
When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the
paper path.
& “Cleaning the Paper Path for Ink Smears” on page 106
The paper is curled.
Solutions
Place the paper on a at surface to check if it is curled. If it is, atten it.
The print head is rubbing the surface of the paper.
Solutions
When printing on thick paper, the print head is close to the printing surface and the paper may be
scued. In this case, enable the reduce scu setting.
On the printer's control panel, select
> General Settings > Printer Settings, and then enable ick
Paper.
The back of the paper was printed before the side that had already been printed was dry.
Solutions
When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the
paper.
Printed Photos are Sticky
The print was made on the wrong side of the photo paper.
Solutions
Make sure you are printing on the printable side. When printing on the wrong side of the photo paper,
you need to clean the paper path.
& “Cleaning the Paper Path for Ink Smears” on page 106
Solving Problems > Print Quality is Poor
147

Epson SC-P900 Series Specifications

General

Maximum Print Resolution	5760 x 1440 dpi
Ink Type	UltraChrome PRO10 pigment ink
Number of Ink Colors	10
Borderless Printing	Yes
Print Technology	Piezo electric inkjet
Connectivity	USB 3.0, Ethernet, Wi-Fi
Display	4.3-inch color LCD
Minimum Ink Droplet Size	1.5 picoliters
Paper Handling	Auto Sheet Feeder, Roll Paper
Media Sizes	A2, A3, A4, Letter, Legal
Media Types	Photo paper, fine art paper, roll paper