Epson SC-P900 Series - Network Settings

❏ Power O If Inactive
Select this setting to turn the printer o automatically if it is not used for a specied period of
time. Any increase will aect the product’s energy eciency. Please consider the environment
before making any change.
❏ Power O If Disconnected
Select this setting to turn the printer o aer 30 minutes when all ports including the USB port are
disconnected.
is
feature may not be available depending on your region.
Power O Timer:
Your product may have this feature or the Power
O
Settings feature depending on the location of
purchase.
Select this setting to turn the printer o automatically when it is not used for a specied period of
time. You can adjust the time before power management is applied. Any increase will aect the
product’s energy eciency. Please consider the environment before making any change.
Date/Time Settings:
❏ Date/Time
Enter the current date and time.
❏ Daylight Saving Time
Select the summer time setting that applies to your area.
❏ Time Dierence
Enter the time dierence between your local time and UTC (Coordinated Universal Time).
Language:
Select the language used on the LCD screen.
Length Unit:
Select the length unit.
Related Information
& “Saving Power” on page 106
Network Settings
Select the menus on the control panel as described below.
> General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Wi-Fi (Recommended):
❏ Wi-Fi Setup Wizard
❏ Push Button Setup(WPS)
Product Information > Settings Menu List > Network Settings
208