Scanning Documents or Photos 38
SCAN1.FM (A4 size) Rev.CR4CJ350 User’s Guide
2. If you need to create a scan size that is not in the Target Size list, you can create a
custom size. Click the arrow in the list and select Customize. You see the Target Size
window:
Type a name for your custom size, enter the size, click the Save button, then click OK.
Your new size appears in the Target Size list.
3. In Professional Mode, you can fine-tune the size using additional tools. Click the +
(Windows) or r (Mac OS X) next to Target Size to display these tools:
❏ To size your image by a certain percentage, adjust the Scale value.
❏ To change the way your image is cropped, turn Trimming on or off. (See EPSON
Scan Help for details.)
❏ To unlock the proportions of your scan size, click the lock icon. Then adjust the
marquee or enter new width/height measurements.
4. Once you have selected your scan size, you can click and drag the marquee to the area
in the image you want to scan. For details, see "Adjusting the Scan Area (Marquee)" on
page 33. The marquee proportions are retained as you adjust it.
If you need to rotate the marquee for a landscape or portrait image without changing its
aspect ratio, click the orientation icon. (Not available if you are scanning at the
Original Target Size.)
Note:
For more information about using the Target Size tools, click Help in the EPSON Scan window.
5. Now you are ready to scan your image(s). See "Finishing the Scan" on page 39 for
instructions.
To Next Page
Loading...
Need help?
General