Epson Scanner

Using a Memory Card 88
CARD.FM (A4 size) Rev.CR4CJ350 User’s Guide
1. Make sure the memory card light is not flashing.
2. Pull the memory card out of its slot.
c
Caution:
Do not remove a memory card when the memory card light is flashing or you may lose data
from the memory card.
Copying Files Between a Memory Card and Your Computer
Copying files to your computer
1. Make sure the scanner is turned on and a memory card is inserted.
2. Windows XP x64 and XP
Click Start and select My Computer.
Windows Me, 98 SE, and 2000:
Double-click the My Computer icon on your desktop.
3. Double-click the removable disk icon, then select the folder in which your files are
saved.
Note:
If you have set a volume label, it is displayed as the drive name. If you have not set the volume
label, “removable disk” is displayed as the drive name on Windows XP x64 and XP.
4. Select the files you want to copy and drag them to a folder on your computer’s hard
drive.
Saving files to a memory card
Before inserting your memory card, make sure the write protect switch is set to allow
writing to the memory card.
Note:
After copying a file to a memory card from a Macintosh computer, an older digital camera not be
able to read the memory card.
1. Make sure the scanner is turned on and a memory card is inserted.
2. Windows XP x64 and XP:
Click Start and select My Computer.