Using a Memory Card 84
CARD.FM (A4 size) Rev.CR4CJ350 User’s Guide
Chapter C
Using a Memory Card
Introduction
You can use the scanner’s memory card slots to copy files to a computer connected to the
scanner. You can also use it to copy files on your computer to your memory card.
For instructions on printing from a memory card, see the booklet that came with your
scanner.
Handling Memory Cards
Memory card copying precautions
Keep the following in mind when copying files between your memory card and computer:
❏ Check the documentation that came with your memory card and any adapter you may
be using for any handling guidelines.
❏ Do not eject your memory card or turn off the scanner while the memory card light is
flashing or you may lose data.
❏ Make sure that your memory card is not write-protected. Many memory cards have a
write-protect switch.
❏ Do not copy files to a memory card while you are printing from the memory card.
❏ The scanner display does not update information about your memory card after you
copy files to it or delete files from it. To update the information displayed, wait until the
memory card light stops flashing, then eject and reload the memory card.
❏ When you are using EPSON File Manager to access photos on your memory card, do
not remove the memory card until after you close File Manager.
Supported memory cards
You can use the following types of memory cards with your scanner: