8. Press ENTER to exit the setting mode, or press SPACE to continue making settings.
CAUTION
❒ The setting values are not stored permanently in the EEPROM until you turn the printer
off. Turn off the printer immediately after the adjustment.
❒ Reset protect counter B using the adjustment program to make the printer perform the
initial ink charge operation before sending the unit back to the customer.
9. The menu below appears on the display. If you want end the program, press 5.
Stylus 1500 <********> Customer Data <********> 95/**/**
( Customer Data Input ) .... 1
( Adjustment ) .... 2
( END ) .... 5
SELECT MENU
■
10. Turn off the printer.
Adjustments
EPSON Stylus 1500 Service Manual 4-21
To Next Page
Loading...
