The StatusMonitor provides an error notification if a printer
error occurs, and you can choose how that error notification
will be given using the Configuration setting dialog box. Click
the
Configuration
button while the StatusMonitor dialog box
is open. The following dialog box appears:
Choose the error notification method, warning method, and
what kind of error(s) you want the StatusMonitor to check for;
then click
OK
.
Nozzle Check
Checks the print head nozzles for clogging. Use this utility
when you notice a decline in print quality, and after cleaning
a print head to confirm that the print head nozzles have been
cleaned. If the nozzle check utility indicates the print heads
need cleaning, you can access the Head Cleaning utility directly
from the Nozzle Check utility. See Chapter 8, “Troubleshooting,”
for more information.
status02
Macintosh
4
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 4
02-24-97 DR, pass 0
Printing With Macintosh
4-31
To Next Page
Loading...
