4. When installation finishes, click
Restart
to complete the
installation and restart your computer and activate the new
software.
If you use the optional LocalTalk Interface Card (C82312
✽
)
or Ethernet Interface Card (C82331
✽
), you need to assign a
name to your printer using the EPSON Namer utility as
described on page 2-24. If you use a serial interface, skip to
“Selecting your printer with the Chooser” on page 2-25.
Printer software components
Your printer software CD-ROM contains the following
software components:
EPSON Stylus Printer Driver Package
❑
EPSON Stylus (EX)
This is the printer driver software that runs your printer if
you use the serial interface.
❑
EPSON Stylus (AT)
This is the printer driver software that lets you use the
printer on an AppleTalk network.
❑
EPSON Monitor2
Monitors and manages background printing jobs. You must
turn on background printing in the Chooser to use this
utility. For more information, see “Using the EPSON
Monitor2 Utility” on page 4-31.
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
2-26
Getting Started
To Next Page
Loading...
