6. When the installation is complete, click
OK
to exit the
installation program.
The installation program automatically selects this printer as
the default printer for Windows applications.
The printer software that controls your printer is now installed.
For information on accessing and using the software, see
Chapter 3, “Printing With Windows.”
For DOS users
Most DOS software programs include drivers for EPSON
ESC/P 2 printers. You can select these drivers and take
advantage of your printer’s advanced built-in scalable fonts
and graphics handling.
Most DOS programs require you to select from a list of printers
in order to install the printer driver. You should select your
printer to take advantage of all your printer’s advanced
features. If your printer is not included in the list, contact your
software manufacturer to obtain an update.
If your printer driver is not listed, pick from the first available
printer in the list below.
When printing with black ink only:
LQ-870/1170
LQ-570 (+)/1070(+)
SQ-870/1070
LQ-850
LQ-500
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
2-20
Getting Started
To Next Page
Loading...
