3. In the File menu, select
Run
. You see the Run dialog box. In
the Command Line box, type
D:\SETUP
. If the CD-ROM
drive you are using is not drive D, substitute the correct
letter. If you are installing from floppy disks, type
A:\SETUP
(or
B:\SETUP
).
Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, type
EPSETUP
instead of
SETUP
. In
the dialog box that appears, click the
Driver disk creation
utility
button and follow the on-screen instructions.
4. Click
OK
. You see the EPSON Printer Utility Setup dialog box.
5. Select your printer name and click
OK
. The installation
program begins copying the printer software files. Follow
the message that appears if you are installing from floppy
disks.
After a few moments, the installation program creates the
EPSON program group in Windows.
3101l2
3102l2
2
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
Getting Started
2-19
To Next Page
Loading...
