IBM XL24E emulation control codes
This printer emulates the IBM Proprinter with the following commands.
For detailed information, see IBM’s X24/X24E reference manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*
1
), ESC 0, ESC 1, ESC 2, ESC 3,
ESC 3 (AGM
*1
), CR
Page format:
ESC C, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM
*1
)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC _
Spacing:
BS, SP, ESC [ \
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \
Bitimage:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM
*1
)
*1
Alternate Graphics Mode
L
Loire-p Ref. Guide
Rev.c
A5 size Appendix D
02-24-97 DR, pass 0
D-20
Specifications
To Next Page
Loading...
