Choosing a Place for the Printer
Follow the guidelines listed below when selecting a location for
your printer.
❑
Place the printer on a flat, horizontal, stable surface. The
printer will not operate properly if it is tilted or at an angle.
❑
Place the printer so that it can be connected easily to the
computer or the network interface cable.
❑
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
❑
Avoid places subject to shocks and vibrations.
❑
Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l’imprimante près d’une prise de contacte où la fiche
peut être débranchée facilement.
❑
Avoid electrical outlets controlled by wall switches or
automatic timers. Also, avoid outlets on the same circuit as
large motors or other appliances that can cause fluctuations
in line voltage.
❑
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
❑
Use a grounded power outlet; do not use an adapter plug.
❑
Clear the paper path of any obstruction before printing on
continuous paper.
2
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
Getting Started
2-3
To Next Page
Loading...
