Dots are missing in printed characters or graphics.
Cause What to do
For DOS users:
The Network I/F (interface)
mode is turned off.
Turn on the Network I/F mode in the
default-setting mode as described in
“Changing the default settings” on
page 6-10.
Printer utilities
The Status Monitor window does not appear when you are
using Windows 95.
Cause What to do
The
Use Print Manager for
this port
option is checked in
the Queue Setup window.
Make sure
Use Print Manager for this
port box
is not checked. Click the
Start
button, point to
Programs
, point
to
Epson
, and click
Spool Manager4
.
Then click
Queue
and
Setup
in the
EPSON Spool Manager window.
Enable bi-directional
support for this printer
is not
selected in the Spool Settings
window.
You must select
Enable
bi-directional support for this printer
in the Spool Settings window to use
the Status Monitor. To access the Spool
Settings window, click the
Start
button, point to
Settings
, and click
Printers
. Right-click the icon for your
printer and choose
Properties
from
the drop-down menu. Click the
Details
tab; then click
Spool Settings
.
Select
Enable bi-directional support
for this printer
.
8
Troubleshooting
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 8
02-24-97 DR, pass 0
Troubleshooting
8-33
To Next Page
Loading...
