Epson Stylus Photo 1390 - Page 153

EPSON Stylus Photo 1390/1400/1410 Revision B
MAINTENANCE Overview 153
Figure 6-8. Lubrication (7)
Figure 6-9. Lubrication (8)
Figure 6-10. Lubrication (9)
Figure 6-11. Lubrication (10)
Figure 6-12. Lubrication (11)
<Lubrication Point>
The Driven Pulley Holder
<Lubrication Type>
G-26
<Lubrication Amount>
φ1mm x 2mm x 4 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
<Lubrication Point>
Contact points of the Driven Release
FLAG and the Upper Paper Guide
<Lubrication Type>
G-26
<Lubrication Amount>
φ2mm x 6 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
<Lubrication Point>
Contact points of the EJ Grounding
Spring and Front/Rear Paper EJ Rollers
<Lubrication Type>
G-45
<Lubrication Amount>
φ1mm x 2mm x 2 points
<Remarks>
Apply with a syringe.
(Pin Head:
φ1mm)
Upper Paper Guide
Rear Paper EJ Roller
Front Paper EJ Roller
EJ Grounding
Spring
Right Side
<Lubrication Point>
The bushings of the Front Paper Guide
<Lubrication Type>
G-45
<Lubrication Amount>
1. Apply evenly.
2.
φ1mm x 2mm
<Remarks>
Apply with a brush.
<Lubrication Point>
1. Left side of the PF Roller Shaft (Left
of the E-Ring)
2. Mounting location of the Bushing 8
<Lubrication Type>
G-45
<Lubrication Amount>
1. Approx.
φ1mm x 5mm
2. All around the Shaft
<Remarks>
1. Apply with a syringe.
2. Apply with a brush.
1
1
2
Right Side
Front Paper
Guide
1
Left Side
Front Paper
Guide
Bushing 8
1
2
PF Roller