Epson Stylus Photo 895 - Page 140

EPSON Stylus PHOTO 895/785EPX Revision A
Maintenance Overview 140
9
<Lubrication Point>
• Main frame shaft (Right). Refer to Figure
6-9. "Lubrication Point 9".
<Lubrication Type>
•G-26
<Lubrication Amount>
• Φ1mm x 5mm
• Use a syringe to lubricate.
10
<Lubrication Point>
• Main frame shaft (Left). Refer to Figure
6-10. "Lubrication point 10".
<Lubrication Type>
•G-26
<Lubrication Amount>
•
Φ
1mm x 5mm
• Use a syringe to lubricate.
11
<Lubrication Point>
• Entire cavity of the PF roller bush. Refer to
Figure 6-11. "Lubrication point 11".
<Lubrication Type>
•G-26
<Lubrication Amount>
•
Φ
3mm x Full circle
• Use a syringe to lubricate.
12
<Lubrication Point>
• Shaft of the I/S frame. Refer to Figure
6-12. "Lubrication point 12".
<Lubrication Type>
•G-26
<Lubrication Amount>
• Φ1mm x 8mm
• Use a syringe to lubricate.
Table 6-2. Lubrication Point
No. Lubrication Type/Point Remarks
13
<Lubrication Point>
• Cavity of the paper eject roller bush
(Right). Refer to Figure 6-13. "Lubrication
point 13".
<Lubrication Type>
•G-26
<Lubrication Amount>
•
Φ
2mm x Full circle
• Use a syringe to lubricate.
14
<Lubrication Point>
• Roller paper stopper. Refer to Figure 6-14.
"Lubrication point 14".
<Lubrication Type>
•G-26
<Lubrication Amount>
• Φ5mm x Diagonal two positions
• Use a syringe to lubricate.
• Wipe out the excessive oil.
15
<Lubrication Point>
• Combination gear 14.4, 38.4 attaching to
the I/S frame. Refer to Figure 6-15.
"Lubrication point 15".
<Lubrication Type>
•G-26
<Lubrication Amount>
•
Φ
1mm x 2mm x 3points
• Use a syringe to lubricate.
16
<Lubrication Point>
• Rib of the LD roller shaft. Refer to Figure
6-16. "Lubrication point 16".
<Lubrication Type>
•G-26
<Lubrication Amount>
• Φ1mm x 2mm x 2points
• Use a syringe to lubricate.
Table 6-2. Lubrication Point
No. Lubrication Type/Point Remarks