EPSON Stylus PHOTO 895/785EPX Revision A
Disassembly and Assembly Disassembly 96
C H E C K
P O I N T
Make sure that all gears are set in each gear shaft on the Ink
system frame.
Figure 4-43. Gear engagement on the Ink system frame
Make sure that the ink tube is placed along the following
position.
Figure 4-44. Ink tube placing position
After installing the Pump Assembly, ensure that the cleaner
parts move back and forth by rotating the Gear.
Combination Gear 37.6, 44.4
Combination Gear 9.6, 24
Spur Gear 14.4, 38.4
Pump Unit
Cap Assembly
Ink Tube
Tightening torque for screw
• C.B.S 3x6 F/ZN screw for ink system frame & Cap assembly.: 9+/1 kgf.cm
To Next Page
Loading...
