Epson Stylus Photo RX585 - Page 118

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Maintenance Overview 118
LUBRICATION OF EJECT FRAME ASSY
LUBRICATION OF DRIVEN PULLEY
Lubrication
Points
Paper Eject Roller
Shaft and shaft holders
(2 points: right and left)
Type G-71
Amount of
Application
ø 1x3 mm
Applying
Tool
Injector
Precautions
Make sure that the
rubber rollers on the
Paper Eject Roller
Shaft are free from
grease.
Lubrication
Points
Right and left Eject
Frame Assy shaft
holders (On the back
side of the Eject Frame
Assy: 9mm from the
end point)
Type G-71
Amount of
Application
ø 2x2 mm x2
(Inside of the right shaft
holder)
ø 2x2 mm x2
(Inside of the left shaft
holder)
Applying
Tool
Injector
Precautions
Left side of Paper
Eject Roller Shaft
G-71
Right side of Paper
Eject Roller Shaft
G-71
Rubber rollers
must be free
from grease
Right Side
9mm
Left Side
9mm
G-71 (x4)
Lubrication
Points
Surfaces which come in
contact with the printer
frame (4 points)
Type G-71
Amount of
Application
ø 1x 2 mm
Applying
Tool
Injector
Precautions
Lubrication
Points
Surfaces which come in
contact with the
Driven Pulley shaft (2
points)
Type G-71
Amount of
Application
ø 1x 1 mm
Applying
Tool
Injector
Precautions
G-71 (x4)
G-71
G-71