Epson Stylus Photo RX585 - 1.4 General Specifications

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Product Description General Specifications 16
1.4 General Specifications
1.4.1 Electrical Specifications
 Primary power input
Note 1: When no printing is made for more than three minutes, the printer goes into the standby
mode reducing the electric voltage applied to the motor in order to save power.
2: When no operation is made with the control panel for more than 13 minutes, the panel
goes to the low power mode within two minutes.
1.4.2 Environmental Conditions
Note *1: The combined Temperature and Humidity conditions must be within the blue-shaded
range in
Fig.1-4.
*2: No condensation
*3: Non-operating with unpacked.
*4: Must be less than 1 month under 40°C.
Figure 1-4. Temperature/Humidity Range
Table 1-10. Primary Power Specifications
Item 100-120V model 220-240V model
Rated power supply voltage 100 to 120 VAC 220 to 240 VAC
Input voltage range 90 to 132 VAC 198 to 264 VAC
Rated current 0.6 A (max. 1.2 A) 0.3 A (max. 0.6 A)
Rated frequency 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Insulation resistance TBD V (for one minute)
Energy conservation International Energy Star Program compliant
Power
consumption
Stand alone copy
(ISO/IEC10561 Letter Pattern,
Plain paper)
Approx. 15 W Approx. 15 W
Low power mode Approx. 4.0 W Approx. 4.5 W
Sleep mode Approx. 1.3 W Approx. 1.5 W
Power off mode Approx. 0.2 W Approx. 0.3 W
Table 1-11. Environmental Conditions
Condition Temperature
*1
Humidity
*1,2
Shock Vibration
Operating
10 to 35°C
(50 to 95°F)
20
to 80%
1G
(1 msec or less)
0.15G,
10 to 55Hz
Storage*
3
(unpacked)
-20 to 40°C*
4
(-4°F to 104°F)
5
to 85%
2G
(2 msec or less)
0.50G,
10 to 55Hz
C A U T I O N
 When returning the repaired printer to the customer, make sure
the Printhead is covered with the cap and the ink cartridge is
installed.
 If the Printhead is not covered with the cap when the printer is
off, turn on the printer with the ink cartridge installed, make
sure the Printhead is covered with the cap, and then turn the
printer off.
10/50
27/80
30/86 35/95 40/10420/68
Temperature (°C/°F)
20
30
40
50
90
80
70
60
Humidity (%)