Variety of Printings 134
Printing with Non-Epson Media
When using the non-Epson media, make the paper settings
according to the paper characteristics before printing. There are
two ways to make settings and to print.
❏ Register the custom paper in the Menu mode using the
printer's control panel, and print using the registered setting.
See “Making the paper settings” on page 183.
❏ Make setting using the Paper Configuration dialog box in the
printer driver.
Note:
❏ Make sure to check the paper characteristics such as paper tension,
ink fixing, or paper thickness before setting the custom paper. See
the description that comes with the paper for information on the
paper characteristics.
❏ The settings you make on the Paper Configuration dialog box have
priority over the settings you make on the printer's control panel.
❏ You can register the custom paper or printer settings on your
computer by using EPSON LFP Remote Panel. See the EPSON
LFP Remote Panel online help for detailed information.
If it does not print evenly on the custom paper you have
registered, use unidirectional printing. Clear the High Speed
check box in the printer driver.
To Next Page
Loading...
