The Control Panel 158
7. Set the parameter
Press the Menu
button to store the selected parameter. If
the parameter is for execution only, press the Menu
button
to execute the function for the item.
After execution, the printer exits Menu mode and returns to
the READY status.
8. Exit Menu mode
Press the Pause
button. The printer returns to the READY
status.
Details of Menu mode
PRINTER SETUP
This menu contains the following items.
ROLL COUNTER or SHEET COUNTER
You can get a message when there is not much paper left, by
setting the roll alert or sheet alert.
When using roll paper, enter the length of roll paper set in the
printer and the alert value.
When using cut-sheet paper, enter the number of cut sheets set in
the printer and the alert value.
Note:
This setting is available only when you select Roll Paper or Cut Sheet
for PAPER COUNTER in Maintenance mode.
To Next Page
Loading...
