Problem Solver 268
For paper other than Epson’s, register and select paper
thickness in Menu mode. Make sure it is correct for the paper
you are using. “Making the paper settings” on page 183.
❏ Set the PLATEN GAP to WIDE in the PRINTER SETTING of Menu
mode. See “PRINTER SETUP” on page 158.
Print Quality Could be Better
Click the caption under the illustration that best resembles your
printout.
If you are having print quality problems, try the solutions offered
here.
“Horizontal banding” on page 269
“Vertical misalignment or
banding” on page 270
“Color documents print in black
only” on page 272
“Faint printout or gaps” on page
270
“Blurry or smeared printout” on
page 271
To Next Page
Loading...
