The Control Panel 190
Details of Maintenance mode items
HEX DUMP
Data received from the host computer can be printed out in
hexadecimal numbers.
To print it out, follow the steps below.
1. Make sure that paper is loaded in the printer.
2. In Maintenance mode, press the Paper Feed or Paper
Feed button to display HEX DUMP.
3. Press the Menu
button to display PRINT. Press the Menu
button again to start printing.
The print data in the print buffer is printed with 16-byte hex.
data in the left column, and corresponding ASCII characters
in the right column.
Note:
If the last data is less than 16 bytes, it is not printed until you press the
Pause
button.
To Next Page
Loading...
