The Control Panel 157
Basic Menu setting procedure
This section describes how to enter Menu mode and make settings
with the buttons on the control panel.
Note:
❏ Press the Pause
button whenever you want to exit Menu mode
and return to the READY status.
❏ Press the Paper Source button to return to the previous step.
1. Enter Menu mode
Make sure that READY appears on the LCD panel, and then
press the Menu
button. The first menu appears on the LCD
panel.
2. Select a menu
Press the Paper Feed or Paper Feed button to select a
desired menu.
3. Set the menu
Press the Menu
button to set the selected menu. The first
item appears on the LCD panel.
4. Select an item
Press the Paper Feed or Paper Feed button to select a
desired item.
5. Set the item
Press the Menu
button to enter the selected item. The first
parameter appears on the LCD panel.
6. Select a parameter
Press the Paper Feed or Paper Feed button to select a
parameter for the item.
To Next Page
Loading...
