Maintenance and Transportation 245
Cleaning the Printer
To keep your printer operation in its top condition, clean it
thoroughly if it becomes soiled.
w
Warning:
Be careful not to touch the gears inside the printer.
c
Caution:
❏ Never use alcohol or thinners to clean the printer; these
chemicals can damage the components as well as the case.
❏ Be careful not to get water on the printer mechanism or
electronic components.
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
See “Paper Information” on page 299.
1. Make sure the printer is turned off and all the lights are off,
and then unplug the power cord. Leave the printer for a
minute.
To Next Page
Loading...
