The Control Panel 191
LANGUAGE
You can select the language to be displayed on the LCD panel.
To select a suitable language, follow the steps below.
1. In Maintenance mode, press the Paper Feed or Paper
Feed button to display LANGUAGE, and press the Menu
button.
2. Press the Paper Feed or Paper Feed to select a suitable
language.
3. Press the Menu
button to set the language. Confirm that
the READY (or similar word in the language selected) appears
on the LCD panel.
Note:
It takes a while until READY (or similar word in the language selected)
appears.
PAPER COUNTER
You can select a paper remaining counter function. When this
function is on, ROLL COUNTER or SHEET COUNTER appears on the
PRINTER SETUP menu.
1. In Maintenance mode, press the Paper Feed or Paper
Feed button to display PAPER COUTNER, and then press the
Menu
button.
2. Press the Paper Feed or Paper Feed button to select a
suitable function.
3. Press the Menu
button.
To Next Page
Loading...
