The Control Panel 192
UNITS
You can select the units for displaying length. To select the units,
follow the steps below.
Note:
This item is available only when you choose ENGLISH in LANGUAGE.
1. In Maintenance mode, press the Paper Feed or Paper
Feed button to display UNITS, and press the Menu
button.
2. Press the Paper Feed or Paper Feed button to select a
suitable unit.
3. Press the Menu
button to set the units.
CUT PRESSURE
You can select cutting pressure.
SSCL
You can perform ultrasonic head cleaning.
DEFAULT PANEL
You can set all setting values you made in Menu mode to their
factory set value.
CRTG INFO MENU
For maintenance service person only.
To Next Page
Loading...
