The Control Panel 164
AUTO CLEANING
When you select ON and perform a nozzle check from the printer
driver or the control panel, the printer not only checks for clogged
nozzles, but also performs head cleaning automatically.
Note:
Do not select ON if you are using non-Epson special media, or if the width
of paper you are using is less than 210 mm.
QUIET CUT
When you select ON, the printer cuts the printout slowly to
decrease the cutting noise and paper particles.
INIT SETTINGS
You can return all setting values you have made in the PRINTER
SETUP to their factory set value.
TEST PRINT
This menu contains the following items.
NOZZLE CHECK
You can print a print head nozzle check pattern for each ink
cartridge. From the printing results, you can check whether the
nozzles are delivering ink properly. For details, see “Checking the
print head nozzles” on page 173.
Note:
You can print a nozzle check pattern using the Utility menu in the
printer software. For Windows, see “Using the Printer Utilities” on
page 31. For Mac OS X, see “Using Printer Utilities” on page 53.
STATUS CHECK
You can print the current Menu status. For details, see “Printing
a status sheet” on page 186.
To Next Page
Loading...
