The Control Panel 176
10. Press the Menu button, and the printer starts printing.
After printing is complete, the head alignment starts
automatically.
If you are not satisfied with the result of BI-D 2-COLOR
alignment, press the Paper Source button to return to the
previous level, and then select BI-D ALL.
If you are not satisfied with the result of BI-D ALL alignment,
try UNI-D.
You can also align the print head individually by selecting #1,
#2, or #3. Select an ink dot size from #1 to #3 depending on
the media you use and the print mode you want to try. The
table below illustrates which parameter is available for the
media type and print quality. For Print Quality, refer to the
printer driver.
11. Press the Pause
button to return to the READY status.
To Next Page
Loading...
