Maintenance and Transportation 234
9. Make sure INSTALL CNVRSION CRTG appears on the LCD
panel, and then insert three conversion cartridges in the slots
on the left ink compartment.
Note:
If REPLACE CNVRSION CRTG appears on the LCD panel, press the
Pause button. Remove the old conversion cartridge(s) from the
left ink compartment, and then insert the new conversion
cartridge(s). Finally, go to step 4 to start again.
10. Make sure LOWER THE LEFT INK LEVER appears on the LCD
panel, and then lower the ink lever on the left ink
compartment.
11. The printer starts draining ink, and DRAINING XX% appears on
the LCD panel. Wait until draining is complete.
To Next Page
Loading...
