Epson Stylus Pro 7400 - Page 130

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 130
MAINT INFO MENU P Paper info
P1 Number of settings of roll paper --- <nnnnnnnnn> Number of times
P2 Number of settings of cut sheet (manual feed) --- <nnnnnnnnn> Number of times
P3 Printable length Paper width 1 <nnnnnnnnn> mm
P4 Number of ejections of paper Paper width 1 <nnnnnnnnn> Number of times
P5 Printable length Paper width 2 <nnnnnnnnn> mm
P6 Number of ejections of paper Paper width 2 <nnnnnnnnn> Number of times
P7 Printable length Paper width 3 <nnnnnnnnn> mm
P8 Number of ejections of paper Paper width 3 <nnnnnnnnn> Number of times
P9 Printable length Paper width 4 <nnnnnnnnn> mm
P10 Number of ejections of paper Paper width 4 <nnnnnnnnn> Number of times
P11 Printable length Paper width 5 <nnnnnnnnn> mm
P12 Number of ejections of paper Paper width 5 <nnnnnnnnn> Number of times
P13 Printable length Paper width 6 <nnnnnnnnn> mm
P14 Number of ejections of paper Paper width 6 <nnnnnnnnn> Number of times
P15 Printable length Paper width 7 <nnnnnnnnn> mm
P16 Number of ejections of paper Paper width 7 <nnnnnnnnn> Number of times
P17 Printable length Paper width 8 <nnnnnnnnn> mm
P18 Number of ejections of paper Paper width 8 <nnnnnnnnn> Number of times
P19 Printable length Paper width 9 <nnnnnnnnn> mm
P20 Number of ejections of paper Paper width 9 <nnnnnnnnn> Number of times
P21 Printable length Paper width 10 <nnnnnnnnn> mm
P22 Number of ejections of paper Paper width 10 <nnnnnnnnn> Number of times
P23 Printable length Other width <nnnnnnnnn> mm
P24 Number of ejections of paper Other width <nnnnnnnnn> Number of times
Continued to next page
Note • The “Paper width” is the width specified by “ESC(S)” command. However, if paper width detected by sensors is narrower than the specified width, the detected width is adopted.
• When a print job does not include the ESC(S) command, it is counted in the “Other width.
Table 1-64. MAIN INFO Menu Items (continued)
Top menu 1st hierarchy 2nd hierarchy
Settings Unit
Item Item Description Item Description