EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 131
MAINT INFO MENU P Paper info
P25 Printable length Paper width 1 <nnnnnnnnn> mm
P26 Number of ejections of paper Paper width 1 <nnnnnnnnn> Number of times
P27 Printable length Paper width 2 <nnnnnnnnn> mm
P28 Number of ejections of paper Paper width 2 <nnnnnnnnn> Number of times
P29 Printable length Paper width 3 <nnnnnnnnn> mm
P30 Number of ejections of paper Paper width 3 <nnnnnnnnn> Number of times
P31 Printable length Paper width 4 <nnnnnnnnn> mm
P32 Number of ejections of paper Paper width 4 <nnnnnnnnn> Number of times
P33 Printable length Paper width 5 <nnnnnnnnn> mm
P34 Number of ejections of paper Paper width 5 <nnnnnnnnn> Number of times
P35 Printable length Paper width 6 <nnnnnnnnn> mm
P36 Number of ejections of paper Paper width 6 <nnnnnnnnn> Number of times
P37 Printable length Paper width 7 <nnnnnnnnn> mm
P38 Number of ejections of paper Paper width 7 <nnnnnnnnn> Number of times
P39 Printable length Paper width 8 <nnnnnnnnn> mm
P40 Number of ejections of paper Paper width 8 <nnnnnnnnn> Number of times
P41 Printable length Paper width 9 <nnnnnnnnn> mm
P42 Number of ejections of paper Paper width 9 <nnnnnnnnn> Number of times
P43 Printable length Paper width 10 <nnnnnnnnn> mm
P44 Number of ejections of paper Paper width 10 <nnnnnnnnn> Number of times
P45 Printable length Other width <nnnnnnnnn> mm
P46 Number of ejections of paper Other width <nnnnnnnnn> Number of times
Continued to next page
Note • The “Paper width” is the width specified by “ESC(S)” command. However, if paper width detected by sensors is narrower than the specified width, the detected width is adopted.
• When a print job does not include the ESC(S) command, it is counted in the “Other width.
Table 1-64. MAIN INFO Menu Items (continued)
Top menu 1st hierarchy 2nd hierarchy
Settings Unit
Item Item Description Item Description
To Next Page
Loading...
