Epson Stylus Pro 7400 - Page 219

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 219
4.2.2.4 Spindle
REMOVING THE IM SPINDLE
1. Open the ROLL TOP COVER.
2. Remove the Spindle. See Figure 4-13.
DISASSEMBLING THE SPINDLE
1. Remove the Spindle.
2. Remove the Adjustable Paper Stopper (black) from the Spindle together with the
Attachment. See Figure 4-14.
3. Release the two hooked tabs that secure the Attachment, and remove it from the
Adjustable Paper Stopper (black) and the Fixed Paper Stopper (gray). See Figure
4-14.
Figure 4-13. Removing the Spindle
Figure 4-14. Disassembling the Spindle
Match the mark on the Attachment with the mark each on
the Adjustable Paper Stopper (black) and the Fixed Paper Stopper
(gray).
Figure 4-12. Reinstalling the Attachment
ROLL TOP COVER Spindle
Adjustable
Paper Stopper
(black)
Fixed Paper
Stopper
(gray)
Attachment
Hooked
tabs