Epson Stylus Pro 7400 - Page 344

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Adjustment Basic Adjustment 344
9. Load an A4-sized paper vertically on the paper tray, select “Automatic Nozzle Check”
from the “Types of Nozzle Check” box, and click [Next] to start the nozzle check.
10. Load an A3-sized paper horizontally on the paper tray and click [Next] to perform the
alignment check.
11. Check the alignment pattern. If there is any defect, click [Cleaning] to execute
cleaning.
If the check pattern is appropriate, click [Next].
12. Load an A4-sized Archival Matte Paper vertically on the paper tray, and click [Next] to
print the calibration chart.
Figure 5-66. Entire Process Screen
C H E C K
P O I N T
Clicking the [Skip alignment check] button will let you proceed to
the next step without performing the alignment check.
C A U T I O N
Never touch the printed calibration chart.