EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Maintenance Lubrication 378
[Lubrication 2] [Lubrication 3]
Part Name Roll Top Cover
Lubrication Point On the right side of the Roll Top Cover where contacts with the washer
Lubricants G-26
Amount A drop of 1 mm in diameter for around the circle
Remarks Use a small syringe or needle (equivalent to JIS17#).
Lubrication Point
Part Name Roll Top Cover
Lubrication Point On the left and right break pins where contact with the slit-ends of the Roll
Top Cover
Note : The Stylus Pro 7400/7800 are not equipped with the break pins.
Lubricants G-26
Amount A drop of 1 mm in diameter for about one fourth around the each pin
Remarks Use a small syringe or needle (equivalent to JIS17#).
Right Side of the Printer
Lubrication Point
Left Side of the Printer
Lubrication Point
To Next Page
Loading...
