EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Maintenance Lubrication 379
[Lubrication 4] [Lubrication 5]
Part Name Driven Roller C Assy.
Lubrication Point Contact point between the Arm Bracket and the Pressure Cam
• Stylus Pro 7400/7800: 8 points
• Stylus Pro 9400/9800: 14 points
Lubricants G-26
Amount A drop of 1 mm in diameter for about 2 mm length on the each contact
point
Remarks Use a small syringe or needle (equivalent to JIS17#).
Arm Bracket
Lubrication Point
Pressure Cam
Part Name CR Guide Rail
Lubrication Point Outside four surfaces on the CR Guide Rail on where the roller bearings
run through
Lubricants Super Multi Oil #32
Amount A drop of 1 mm in diameter for the full-length of each four surfaces
Remarks • Use a small syringe or needle (equivalent to JIS17#).
• Be sure to clean the surfaces before applying the lubricants.
CR Guide Rail
Lubrication Point
Lubrication Point
To Next Page
Loading...
