72
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum
packed to maintain reliability.
1. Turn on the printer. If a cartridge is expended, the error and ink lights on the control
panel stay on. You must replace the cartridge to be able to print.
2. Open the document cover, then open the ink cartridge cover.
Caution:
Do not try to remove the ink cartridge guard or you may damage the printer.
3. Press the stop button.
If a cartridge is low or expended, the print head moves that cartridge to the replacement
position to indicate that it should be replaced. The power light starts flashing.
If two or more ink cartridges are expended, the cartridge at the far left moves to the
replacement position. The power light starts flashing.
(If no cartridges are low or expended, the print head does not move. If you want to replace a
cartridge before it is low or expended, you need to use the printer software.)
1
2
Do not remove this ink
cartridge guard
To Next Page
Loading...
