F Platen heater
The platen heater ensures that the ink adheres evenly.
U “Heating & Drying” on page 64
U “Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates” on page 74
G Wiper cleaner
The wiper cleaner removes ink from the wiper. It is a consumable; replace about once every six months.
U “Replacing the Wiper and Wiper Cleaner” on page 86
H Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. We recommend that
this unit be cleaned once a week.
U “Regular Part Cleaning” on page 80
I Wiper
The wiper removes ink from the print head nozzles. We recommend that this unit be cleaned once a week. It is a
consumable; replace about once every six months.
U “Regular Part Cleaning” on page 80
U “Replacing the Wiper and Wiper Cleaner” on page 86
J Flushing pad
Ink is discharged onto this pad during flushing. It is a consumable; replace about once every six months.
U “Replacing the Flushing Pad” on page 88
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
14
To Next Page
Loading...
