Printer Parts
Front section (SC-S70600 series, SC-S50600 series)
The illustration shows the SC-S50600 series.
A Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
U “Cleaning Around the Print Head” on page 81
B Additional print drying system
The additional print drying system can be used to rapidly dry ink after printing. Available separately for the
SC-S70600 series.
U Additional Print Drying System Setup Guide
C After heater
The heater can be used to rapidly dry ink after printing.
U “Heating & Drying” on page 64
D Roll support
Rest media temporarily on these supports when removing the take-up roll. There are two supports: one on the left
and one on the right.
U “Media Loading and Take Up” on page 55
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
7
To Next Page
Loading...
